Deal: $89.75 (SAVE Now!)
as of 12/08/2022 (Details)
DIY Bundle: OWC Mercury Extreme Pro 6G SSD and NewerTech AdaptaDrive. A 2.5" Drive for your 3.5" Drive Bay. Experience the extreme performance of an OWC SSD upgrade with this easy DIY AdaptaDrive and Mercury Extreme Pro 6G Kit. AdaptaDrive enables you to install the high-speed Mercury SSD in an available 3.5" SATA drive bay in moments, delivering phenomenal transfer speeds and outstanding reliability.With sustained reads up to 559MB/s and writes up to 527MB/s, up to 100X greater data protection than enterprise class Hard Disk Drives, and RAISE technology for RAID like data protection and reliability, the Mercury Extreme Pro 6G SSD line delivers unbeatable performance, that's backed by a 5 Year OWC SSD Limited Warranty. The NewerTech AdaptaDrive has been benchmark test proven to deliver the same data transfer rates as is experienced when a drive is connected directly to the SATA data bus. The AdaptaDrive doesn't create a bottleneck or any performance throttling...it delivers pure data pass-through performance and drive use convenience from any 2.5" SATA 1.5Gb/s, 3Gb/s, or 6Gb/s hard drive or SSD. AdaptaDrive Specification: NewerTech Part Number: ADPTADRV; Drive Interface: Fully SATA Revision 3.0 (6Gb/s) compatible, SATA Revision 2.0 (3Gb/s) and 1.0 (1.5Gb/s) compatible; Drive Supported: 1) 2.5" SATA 6Gb/s drive. Mercury Electra 3G SSD Specifications: Capacity: 240GB useable; SandForce 2281 processor; Tier-1 synchronous MLC NAND flash storage, SATA Revision 2.0 (6Gb/s) compliant, Supports SATA Revision 2.0 (6Gb/s) and 1.0 (1.5Gb/s); RAID 0/1/10/0+1 and SPAN; Sustained Reads: 559MB/s, Sustained Writes: 527MB/s; 7% over provisioning, ECC recovery: up to 55 bytes correctable per 512-byte sector, Nonrecoverable read errors: less than 1 sector per 1016 bits read.